- ページ 11

スイッチ Bdcom S2510-BのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Bdcom S2510-B 19 ページ。

Do not put things weighing 4.5 kg or over 4.5 kg on the top of the switch.

3.2.2

Installing the Chassis on the Cabinet

The chassis of the switch is fixed on the cabinet through the brackets. When you fix the

brackets, the front template of the router faces forward. The detailed operations are

shown in the following figure.

After the brackets are installed, install the switch on the cabinet. See Figure 3-2.

3.3.1

The switch of S2510-B has a console port and its rate is a value ranging from 1200 to

115200 bps. It has a standard RJ-45 plug. After you connect the console port to the

serial port of PC through a console cable, you can configure and monitor the switch of

S2510-B by running a terminal emulation software, such as super Windows terminal.

The cable is provided according to the host. The communication parameters of the

terminal serial port can be set to a rate of 9600 bps, eight data bits, one stop bit, no sum

check bit and traffic control.

The RJ-45 connector of the console port is shown in the following figure. The RJ-45

plug corresponds to the RJ-45 socket, whose pins can be aligned from left to right with

the value between 1 and 8.

Figure 3-1 Fixing the machine box of the switch

Figure 3-2 Installing the switch on the cabinet

S2510-B Hardware Installation Manual

- 9 -