- ページ 12
スイッチ Bdcom S2510-BのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Bdcom S2510-B 19 ページ。
ページを印刷する
No.
1
Carrier Detecting
2
Data receiving
3
Data-line device ready
4
Data transmitting
5
Transmission requesting
6
Response transmitting
7
Data terminal ready
8
Signal ground
Note:
Because the console port of S2510-B bears no flow control, you need to set Data flow
control to none when using a superior terminal to manage S2510-B configurations, or
the single-pass problem will arise from the superior terminal.
The cable is used to connect the console port of the S2510-B switch and the outside
console terminal device. One end of the cable is a 25-hole DB25 plug and the other end
is a 9-hole plug (DB9). The RJ-45 plug is put into the socket of the console port on the
S2510-B switch. The inner line connection in the cable is shown in figure 3-1. The
console cable is numbered as RLC0301.
Figure 3- 3 RJ-45 connector of the console port
Figure 3- 4 Connecting the console port of S2510-B and a computer
Table 3- 1 Definition of the pins of the console port
Name
S2510-B Hardware Installation Manual
Symbol
CD
No connect
RXD
Input
DSR
No connect
TXD
Output
RTS
No connect
CTS
No connect
DTR
No connect
SG
GND
Remarks
- 10 -