- ページ 17
エンクロージャー Carl's Place Pro Enclosure KitのPDF 組み立て説明書＆取扱説明書をオンラインで閲覧またはダウンロードできます。Carl's Place Pro Enclosure Kit 20 ページ。
Carl's Place Pro Enclosure Kit にも： 組み立て説明書＆取扱説明書 (17 ページ), 組み立て説明書＆取扱説明書 (20 ページ)
ページを印刷するNext, you'll attach the bottom of the impact screen using the cable. The
cable is pre-threaded through the bottom sleeve of the impact screen.
On one of the rear corner
fittings, locate the small hole
at the base of the fitting.
On one side, insert the cable
through the fitting. Secure
the cable with 4 turns of the
cable receiver. Repeat on the
other side.
You may need to loosen the first
receiver if you can't get the second
receiver threaded.
Continue tightening each
end of the cable, until the
cable is taut. Use a pliers to
hold the cable and prevent
it from spinning, while using
/
" Hex key to tighten the
3
16
receiver.
Do not overtighten.
Pro Enclosure Kit C-Series Assembly Manual - V07