- ページ 18

エンクロージャー Carl's Place Pro Enclosure KitのPDF 組み立て説明書＆取扱説明書をオンラインで閲覧またはダウンロードできます。Carl's Place Pro Enclosure Kit 20 ページ。
Carl's Place Pro Enclosure Kit にも：組み立て説明書＆取扱説明書 (17 ページ), 組み立て説明書＆取扱説明書 (20 ページ)

ページを印刷する

Secure each of the bottom

grommets of the screen

with a zip tie. Wrap the zip

tie under and around the

bottom pipe, held in place

by the exposed receiver

end.

These 2 bottom zip ties can

be pulled tight.

Add zip ties to the remaining

grommets, tightening only

enough to maintain an even

gap between the screen and

the pipe.

Check the spacing. The bottom of the screen should be level with the floor.

Screen lifting off the floor? Adjust

zip ties to obtain minimal gap on

the floor. Don't forget the sides,

you may have too much tension

on one of the zip ties attached to

the vertical pipes.

If the screen rests on high pile carpet,

you might find an increased number of

golf balls making their way under the

screen. To keep the balls from rolling

away, consider adding a back cover.

Page | 18