Carl's Place Pro Enclosure Kit 조립 지침 및 사용자 설명서 - 페이지 18
{카테고리_이름} Carl's Place Pro Enclosure Kit에 대한 조립 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carl's Place Pro Enclosure Kit 20 페이지.
Carl's Place Pro Enclosure Kit에 대해서도 마찬가지입니다: 조립 지침 및 사용자 설명서 (17 페이지), 조립 지침 및 사용자 설명서 (20 페이지)
페이지 인쇄Secure each of the bottom
grommets of the screen
with a zip tie. Wrap the zip
tie under and around the
bottom pipe, held in place
by the exposed receiver
end.
These 2 bottom zip ties can
be pulled tight.
Add zip ties to the remaining
grommets, tightening only
enough to maintain an even
gap between the screen and
the pipe.
Check the spacing. The bottom of the screen should be level with the floor.
Screen lifting off the floor? Adjust
zip ties to obtain minimal gap on
the floor. Don't forget the sides,
you may have too much tension
on one of the zip ties attached to
the vertical pipes.
If the screen rests on high pile carpet,
you might find an increased number of
golf balls making their way under the
screen. To keep the balls from rolling
away, consider adding a back cover.
Page | 18