- ページ 5

無線アクセスポイント Draytek VigorAP 910CのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Draytek VigorAP 910C 18 ページ。 802.11ac ceiling-mount access point
Draytek VigorAP 910C にも：クイック・スタート・マニュアル (19 ページ), クイック・スタート・マニュアル (16 ページ)

ページを印刷する

3.1 Ceiling-mount Installation

For a wooden ceiling, you can use self-tapping screws to fix the mounting bracket

without any other fixings. The screws go through the bracket and then directly into

the wood; no 'wall-plug' fixing needs to be used

For ceilings made of plasterboard, you

can use the self-tapping fixings. Hold the

bracket up to the ceiling to mark the

locations for the screw holes with a pencil

then set the bracket aside.

Hammer the fixings lightly to allow the

sharp end to penetrate the plaster and start

the hole, then gently screw the fixing into

the plasterboard with a manual, not

electric, screwdriver (seek professional

help if you are not experienced with these

fixings).

For solid ceilings (e.g. concrete) you will need to assess and provide appropriate

fixing hardware; this is not included with the product.

Warning: The screw set shown below is for wall mounting only. Do

not use it for ceilings as it may not provide adequate support.

With all types of fixing, during installation, always use appropriate

personal safety protection and check for visible or hidden hazards

(cables, joists, pipes) before drilling or fixing. Consult a qualified

installer if you are not experienced.