Draytek VigorAP 910C 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Draytek VigorAP 910C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorAP 910C 18 페이지. 802.11ac ceiling-mount access point
Draytek VigorAP 910C에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (19 페이지), 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄

3.1 Ceiling-mount Installation

For a wooden ceiling, you can use self-tapping screws to fix the mounting bracket

without any other fixings. The screws go through the bracket and then directly into

the wood; no 'wall-plug' fixing needs to be used

For ceilings made of plasterboard, you

can use the self-tapping fixings. Hold the

bracket up to the ceiling to mark the

locations for the screw holes with a pencil

then set the bracket aside.

Hammer the fixings lightly to allow the

sharp end to penetrate the plaster and start

the hole, then gently screw the fixing into

the plasterboard with a manual, not

electric, screwdriver (seek professional

help if you are not experienced with these

fixings).

For solid ceilings (e.g. concrete) you will need to assess and provide appropriate

fixing hardware; this is not included with the product.

Warning: The screw set shown below is for wall mounting only. Do

not use it for ceilings as it may not provide adequate support.

With all types of fixing, during installation, always use appropriate

personal safety protection and check for visible or hidden hazards

(cables, joists, pipes) before drilling or fixing. Consult a qualified

installer if you are not experienced.