- ページ 4

ボイラー Drazice OKC 100 NTRのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Drazice OKC 100 NTR 20 ページ。 Tank-type water heaters for vertical mounting
Drazice OKC 100 NTR にも：操作および設置マニュアル (17 ページ), 操作および設置マニュアル (12 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (18 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (18 ページ)

1 TECHNICAL SPECIFICATION OF PRODUCT

The heater is designed for accumulation heating of service water using electricity or thermal energy via an

exchanger (for the combined design only). Water is heated by an electric element (or a heat exchanger) in

an enamelled thermally insulated accumulator at the time defined by the power supplier. The element is at

the time of heating controlled by a thermostat the temperature of which can be adjusted continuously

(within the range between 5°C and 74°C). Once the selected temperature is reached, heating interrupts

automatically. Water accumulated in the tank is then used for consumption. The tank keeps constant

pressure of water from the water main. If the combination faucet hot water valve is opened, water from

the water supply conduit pressed out by cold water pressure flows out of the heater. Hot water flows out

through the top part, and water flowing in remains in the bottom part of the heater. Pressure principle

allows hot water withdrawal at any place from the heater (Figure 6).

Consumption of hot water in households depends on the number of people, amount of

sanitary equipment, length, diameter and insulation of piping in the flat, or on individual

habits of users. The cheapest option of water heating comes at the time when the

electricity rate is reduced.

Find out in what time intervals your electricity supplier provides reduced tariff and,

depending on that information, select relevant volume and power input of the heater so that

your hot water consumption covered the needs of your household.

Consumption of hot water in households depends on the number of people, amount of

sanitary equipment, length, diameter and insulation of piping in the flat, or on individual

habits of users.

Hot utility water reservoir is insulated by means of a first-class polyurethane foam with zero

Freon content. Adjust the temperature of the heater's thermostat to that level only that you

need to run your home. Thus you will reduce electricity consumption, as well as the amount

of lime sediments on the walls of the receptacle and on the heat exchanger.

- 4 -