- ページ 7

カー・ビデオ・システム Advanced ICE 1319-1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Advanced ICE 1319-1 7 ページ。 Holden, chevrolet & gmc caravan/trailer camera system

FAQ and Troubleshooting

Q - When I install the Multimedia interface, there is no factory picture or aftermarket picture.

A. First check that the multimedia interface is receiving power and has an internal LED on. Also confirm that

dipswitch 10 is in the down position. If these are working as normal try the following.

B. On some vehicles the video needs to be intercepted at the HMI module due to data encryption.

Please try the following:

• Leave the plug and play black Power & CAN-Bus

connector connected at the screen. Re-connect the

factory Video connector (mini usb type) to the factory

monitor.

• Behind the glove box there should be a HMI module as

pictured (See figure 7), connect the video connectors to

the blue connector circled (See Figure 6).

(Please note: Location may be different depending on who

converted the vehicle)

• If there is still no picture display, the video in and out

leads may need to be reversed at the multimedia

interface (See Figure: 8).

Video IN & OUT cables

NORMAL set up

Page 7

Please note: Location may be different depending on

who converted the vehicle

Video IN & OUT cables

REVERSE set up

FIGURE 8

FIGURE 6

FIGURE 7