Advanced ICE 1319-1 Manuel - Sayfa 7
Araç Video Sistemi Advanced ICE 1319-1 için çevrimiçi göz atın veya pdf Manuel indirin. Advanced ICE 1319-1 7 sayfaları. Holden, chevrolet & gmc caravan/trailer camera system
Sayfayı YazdırFAQ and Troubleshooting
Q - When I install the Multimedia interface, there is no factory picture or aftermarket picture.
A. First check that the multimedia interface is receiving power and has an internal LED on. Also confirm that
dipswitch 10 is in the down position. If these are working as normal try the following.
B. On some vehicles the video needs to be intercepted at the HMI module due to data encryption.
Please try the following:
• Leave the plug and play black Power & CAN-Bus
connector connected at the screen. Re-connect the
factory Video connector (mini usb type) to the factory
monitor.
• Behind the glove box there should be a HMI module as
pictured (See figure 7), connect the video connectors to
the blue connector circled (See Figure 6).
(Please note: Location may be different depending on who
converted the vehicle)
• If there is still no picture display, the video in and out
leads may need to be reversed at the multimedia
interface (See Figure: 8).
Video IN & OUT cables
NORMAL set up
Page 7
Please note: Location may be different depending on
who converted the vehicle
Video IN & OUT cables
REVERSE set up
FIGURE 8
FIGURE 6
FIGURE 7