- ページ 6

ボイラー Drazice OKCE 160 NTRのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Drazice OKCE 160 NTR 19 ページ。 Tank-type water heater for vertical mounting
Drazice OKCE 160 NTR にも：操作および設置マニュアル (18 ページ), 操作および設置マニュアル (13 ページ)

ページを印刷する

1.3 DESIGN AND GENERAL HEATER DIMENSIONS

The heater tanks are made of a steel plate and tested by 1.5 MPa multiple of operation pressure value.

The inside of the receptacle is enamelled. A flange is welded onto the bottom of the tank with a flange lid

screwed to it. A sealing ring is inserted between the flange lid and the flange. Thermowells for placing

a heating element, thermostat sensors and safety fuses are located in the flange lid. An anode rod is mounted

onto the M8 nut. Electric wiring is placed underneath the plastic removable cover. Description of basic parts

of the heater - Figure 1. Heater dimensions - Figure 2 and Table 2, Figure 3 and Table 3.

Figure 1

1. Temperature indicator

2. Heating element well

3. Ceramic heating element 4000 W

4. Service thermostat with external control

and safety pipe

5. Electric installation cover

6. Cold water supply pipe

7. Thermowell

8. Hot water withdrawal pipe

9. Mg anode

10. Enamelled steel receptacle

11. Polyurethane insulation

12. Heater shell

- 6 -