Drazice OKCE 160 NTR 운영 및 설치 매뉴얼 - 페이지 6
{카테고리_이름} Drazice OKCE 160 NTR에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKCE 160 NTR 19 페이지. Tank-type water heater for vertical
mounting
Drazice OKCE 160 NTR에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (18 페이지), 운영 및 설치 매뉴얼 (13 페이지)
페이지 인쇄
1.3 DESIGN AND GENERAL HEATER DIMENSIONS
The heater tanks are made of a steel plate and tested by 1.5 MPa multiple of operation pressure value.
The inside of the receptacle is enamelled. A flange is welded onto the bottom of the tank with a flange lid
screwed to it. A sealing ring is inserted between the flange lid and the flange. Thermowells for placing
a heating element, thermostat sensors and safety fuses are located in the flange lid. An anode rod is mounted
onto the M8 nut. Electric wiring is placed underneath the plastic removable cover. Description of basic parts
of the heater - Figure 1. Heater dimensions - Figure 2 and Table 2, Figure 3 and Table 3.
Figure 1
1. Temperature indicator
2. Heating element well
3. Ceramic heating element 4000 W
4. Service thermostat with external control
and safety pipe
5. Electric installation cover
6. Cold water supply pipe
7. Thermowell
8. Hot water withdrawal pipe
9. Mg anode
10. Enamelled steel receptacle
11. Polyurethane insulation
12. Heater shell
- 6 -