- ページ 10

ステレオシステム Anchor BeaconのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor Beacon 10 ページ。 Anchor beacon line array battery-powered, portable line array sound system
Anchor Beacon にも：オーナーズマニュアル (4 ページ), オーナーズマニュアル (4 ページ), オーナーズマニュアル (7 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Beacon® Sound System Owners Manual

HAVING TROUBLE WITH YOUR SOUND SYSTEM?

CONDITION

No Sound (power LED off)

No Sound (power LED on)

Shortened Battery Life

Distorted Sound

Excessive Hum or Noise

HAVING TROUBLE WITH YOUR WIRELESS SYSTEM? (Wireless Models Only)

CONDITION

No Sound (RX Indicator: ON)

No Sound (RX Indicator: OFF)

NEED MORE HELP? Beacon Sound System Setup & Operation Videos!

Rated Power Output

150 watts AC / 125 watts DC

Max SPL @ Rated Power 120 dB

Battery

Two 12V rechargeable, 9.0 AH

Full recharge: approx 7 hrs

Frequency Response

60 Hz – 15 kHz ± 3dB

Line Output (post fader) isolated, 600W , 1/4" phone

AC Power Reqs.

100 – 240 VAC, 50/60 Hz, 300W

max

DC Out

12V 500mA

USB

5V 500mA

Dimensions (HWD)

26.25" x 11" x 18" (66.7 x 28 x

45.7cm)

Weight

51 lbs / 23 Kg

POSSIBLE SOLUTION

• turn POWER switch ON

• charge battery or plug in AC cord

• safety shut down if unit overheats, turn volume lower & turn

speaker ON

• check for output from source

• make sure all cables are completely plugged in

• turn up volume control of input used

• remove plug from speaker output if not using external

speaker output

• charge battery fully; if battery life continues to deteriorate,

contact Anchor Audio customer service: 800.262.4671

• lower system volume control

• use shielded cables

• use balanced microphone

POSSIBLE SOLUTION

• set MUTE switch to on (handheld mic only)

• turn up WIRELESS volume control

• make sure mic is plugged into body pack transmitter

• push mic power button

• turn Beacon POWER switch on

• make sure transmitter power switch is on

• set receiver and transmitter to same channel

• replace battery in transmitter

Visit Our Website: www.anchoraudio.com

BEACON TECHNICAL SPECIFICATIONS

Mic Inputs:

power

Line In

Sensitivity For Rated Output

Lo-Z Microphone -52 dBV (2.5 mVrms)

Hi-Z Microphone

Auxiliary (line)

Phantom Power

(Specifications Subject to Change Without Notice)

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

Lo-Z (1 KW), balanced, XLR

12 VDC condenser mic (phantom)

Hi-Z (10 KW), unbalanced, 1/4" phone

Hi-Z (10 KW), unbalanced, 1/8" stereo

unbalanced, stereo RCA

-43 dBV (7.5 mVrms)

-14 dBV (200 mVrms)

36V

ANCHOR AUDIO CUSTOMER SERVICE

800.262.4671

FOR ADDITIONAL INFORMATION

visit www.anchoraudio.com

MADE IN USA

SIX YEAR WARRANTY