- ページ 2

ステレオシステム Anchor BeaconのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor Beacon 7 ページ。 Anchor beacon line array battery-powered, portable line array sound system
Anchor Beacon にも：オーナーズマニュアル (4 ページ), オーナーズマニュアル (4 ページ), オーナーズマニュアル (10 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Beacon® Sound System Owners Manual

BASIC SYSTEM OPERATION

NOTE: Fully Charge Batteries Before First Use!

1. Remove Travel Dolly (page 3) and open Line Array

(below)

2. Set all Input Levels to minimum & Tone Controls to flat

(middle) setting

3. Plug wired microphone into the MIC 1 or MIC 2 jacks

and/or any audio source into the LINE-IN jacks

4. Switch POWER to ON, Power ON LED will light

5. Slowly increase Level Controls for active Input Jacks

to desired volume

6. Adjust Tone Controls for desired sound quality

IMPORTANT: Make all connections with shielded cables to avoid

hum, buzzing or interference.

OPENING BEACON LINE ARRAY

1. Open Array latches

2. Grasp handle and remove Array from base

3. Turn Array over and place on top of base

4. Close Array latches

5. Slowly flip Array Tower up until locked

securely into place

IMPORTANT: Latches MUST be locked and grill MUST

face forward for system to work!

CLOSING BEACON LINE ARRAY

1. Turn POWER to OFF

2. Fold Array in half (apply slight pressure)

3. Open latches and remove folded Array

4. Turn Array over grasp handle and slide into base

5. Close Array latches

WIRELESS RECEIVERS

LINE OUT – OUTPUT JACK

Balanced 1/4" & Dual RCA provide a

combined output of all active system inputs.

Record your presentation or connnect to

another powered sound system.

UNIVERSAL MIC – INPUT JACKS

Balanced XLR – low impedance, for balanced mic,

powers condenser-type mics.

Unbalanced 1/4" – high impedance, for unbalanced

mics, no phantom power.

USB DC OUT - 12V 500 mA

To charge/power external device

DC OUT - 5V 500 mA

To charge/power external device

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

BACK PANEL OF BEA-7500MU2

MP3 PLAYER

(see page 4)

AC POWER CORD INLET

POWER SWITCH

MADE IN USA

SIX YEAR WARRANTY

LINE IN – INPUT JACKS

The 1/8 (3.5mm) jack is used to hook

up a portable CD player, iPod, laptop

or other external audio source.

Dual RCA unbalanced inputs can

be used for daisy-chaining together

multiple Beacon speakers.

LINE IN LEVEL CONTROL

TONE CONTROLS – BASS/TREBLE

MICROPHONE LEVEL CONTROLS

VOICE OVER BUTTON

Reduce Line and CD Input levels by 12dB

when using microphones allowing speakers

to be heard over background music.

ON = Button In

OFF = Button Out

CHARGE STATUS LEDS

Green - Charge complete

Amber - Charge nearly complete

Red - Charging has begun

Battery Empty LED

Red - charge battery immediately

Power On LED

Green - power on