ページを印刷するSPECIFICATIONS
FORM SPECIFICATIONS
Variable Speed
Capacity
Maximum Depth
Minimum depth
Maximum Width Before Slitting
Maximum Width After Slitting
Form Types
Form Weights
Size-Model
FD 676/680
Height
43"(109cm)
Width
31 "(79cm)
Length
56" to 68 1/4"
Actual
142cm to 173cm
Weight
330 lbs(149kg)
INSTALLATION
UNPACKING AND SET-UP
Do not destroy shipping cartons or materials until
machine has been inspected for damage, missing
parts, and proper operation.
1. Remove bands which hold cardboard box to
wooden pallet. Remove cardboard box.
2. Remove burster top supports.
3. Remove (4) carriage bolts: (2) on infeed end of
burster and (2) outfeed end. Hint: Leave carriage
bolts in place on center burster support,
4. Remove (4) foam blocks.
5. With allen wrench supplied, unfasten four
retaining bolts which hold machine to the board
immediately below it.
NOTE: Center burster support is not fastened to
burster.
6. Add burster feet to burster. (Fig. 1)
7. Remove burster table from its carton.
NOTE: Location of holes on top of table.
8. Set burster on table, lining up holes in table with
holes in burster frame. (Fig.2)
NOTE: Burster will line up evenly on all sides of the
table.
30-500 ft/mm (4.6-154 m/mm)
1-8 pan forms
17 inches (43 cm)
2 3/4 inches (7cm)
19 1/4 inches (49cm)
17 inches (43cm)
Carbon or Carbonless
10 lb. to 140 Ib.
CAUTION: Lifting should not be attempted by
less
than four people.
9. Add 1/4-20 x 1 1/2 locating screws, (included),
to underside of table, screwing up into burster
frame.
2