Formax FD 676 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Formax FD 676에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax FD 676 18 페이지.

페이지 인쇄

SPECIFICATIONS

FORM SPECIFICATIONS

Variable Speed

Capacity

Maximum Depth

Minimum depth

Maximum Width Before Slitting

Maximum Width After Slitting

Form Types

Form Weights

Size-Model

FD 676/680

Height

43"(109cm)

Width

31 "(79cm)

Length

56" to 68 1/4"

Actual

142cm to 173cm

Weight

330 lbs(149kg)

INSTALLATION

UNPACKING AND SET-UP

Do not destroy shipping cartons or materials until

machine has been inspected for damage, missing

parts, and proper operation.

1. Remove bands which hold cardboard box to

wooden pallet. Remove cardboard box.

2. Remove burster top supports.

3. Remove (4) carriage bolts: (2) on infeed end of

burster and (2) outfeed end. Hint: Leave carriage

bolts in place on center burster support,

4. Remove (4) foam blocks.

5. With allen wrench supplied, unfasten four

retaining bolts which hold machine to the board

immediately below it.

NOTE: Center burster support is not fastened to

burster.

6. Add burster feet to burster. (Fig. 1)

7. Remove burster table from its carton.

NOTE: Location of holes on top of table.

8. Set burster on table, lining up holes in table with

holes in burster frame. (Fig.2)

NOTE: Burster will line up evenly on all sides of the

table.

30-500 ft/mm (4.6-154 m/mm)

1-8 pan forms

17 inches (43 cm)

2 3/4 inches (7cm)

19 1/4 inches (49cm)

17 inches (43cm)

Carbon or Carbonless

10 lb. to 140 Ib.

CAUTION: Lifting should not be attempted by

less

than four people.

9. Add 1/4-20 x 1 1/2 locating screws, (included),

to underside of table, screwing up into burster

frame.