- ページ 5

バッテリーチャージャー Formica IntentekのPDF テクニカルマニュアル使用とケア、保証、およびインストールマニュアルをオンラインで閲覧またはダウンロードできます。Formica Intentek 17 ページ。 Wireless charging surface

ページを印刷する

INTENTEK

WIRELESS CHARGING SURFACE

™

TECHINCAL GUIDE USE & CARE, WARRANTY, AND INSTALLATON GUIDE

Oxivir

Tb and wipes

™

Accel

TB and wipes

Peroxide Multi Surface Cleaner and Disinfectant

Suretouch

Oxy-Team

Disinfectant Cleaner

™

ORDINARY CLEANING OF UNDERSIDE OF TABLE/

COUNTER

Should cleaning on the underside of the counter/table be needed,

avoid exposing the electronics to any liquids.

FABRICATION & INSTALLATION

FABRICATION & INSTALLATION RELATED SAFETY

1. All points in Customer Safety above also pertain to fabrication

and installation safety.

2. Fabricators and installers must follow all OSHA/ National Electric

Code /UL Standards as required by installation location or

customer.

3. Do not power the electronics until fully assembled into a table or

top. Make all connections to the Intentek

before applying power.

4. Intentek

Electronics AC Adapter or equivalent must be used.

™

Formica Group does not recommend or warranty hardwiring.

5. Do not install finished table or top while electronics are powered.

6. Always use recommended wire to connect electronics modules.

7. Always cover wiring underneath table/counter.

INSPECTION

Inspect all materials at the time they are received to ensure all

components are free of damage and/or visible defects. Do not

assemble materials with known defects. It is the responsibility of the

customer/fabricator/installer to inspect materials before installation.

Before fabrication, confirm that Computer-Aided Design (CAD) files

are available.

STORAGE CONDITIONS

The optimal conditions for storage are 50 – 90°F (10 – 32°C) and

30% – 65% humidity. Keep materials free from moisture, dust, and

impact. The material should never be stored in contact with the floor

or an outside wall.

Laminate sheets and backers have been shipped in a way to protect

both materials. Formica Group recommends that they are stored

in the way they are shipped in order to continue to protect until

installation.

Due to delicate nature of the coils embedded in the underside of the

decorative laminate, do not slide the back of the laminate against

another surface. Keep coils covered with the provided

covering until cavity has been cut with CNC.

FTB-0918 | Rev 2 | 6/20

ACCLIMATION CONDITIONS

Prior to fabrication, allow laminate sheet, backer, and substrate to

acclimate for at least 48 hours at the same ambient conditions. The

optimal conditions for acclimation are 50 – 90°F (10 – 32°C) and

30% – 65% humidity.

FABRICATION CONDITIONS

Laminate sheets, backers, substrate surfaces, and electronic

components must be dry, clean and free of all grease, dust, and

foreign matter. The optimal conditions for fabrication are

50 – 90°F (10 – 32°C) and 30% – 65% humidity.

INTENTEK

APPLIED TO

1. Medium Density Fiberboard (MDF)

2. Particleboard

3. Hardwood Faced Veneer Core Plywood, also known as

TOOLS & MATERIALS SOLD

BY FORMICA GROUP

•

Electronics Module

™

•

ADDITIONAL TOOLS & MATERIALS NEEDED

•

WIRELESS CHARGING SURFACES MAY BE

™

Grade A Faced Plywood

Intentek

Laminate in the specified quantity

™

Intentek

Laminate backer in the specified quantity

™

Intentek

Electronics Universal AC power adapter in the

™

specified quantity

Intentek

Electronics module in the specified quantity

™

Test Receiver {Provided to Fabricator Partners Only}

Test Receiver manual {Provided to Fabricator Partners Only}

Personal Protective Equipment (PPE), examples:

• Eye protection

• Dust mask

• Gloves

• Hearing protection as needed

Formica Group Technical Guide

| 5