- ページ 11

掃除機 Dreame Bot L10 ProのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dreame Bot L10 Pro 14 ページ。 Robot vacuum and mop

Routine Maintenance

Clean the Main Brush

Press the brush guard clips inwards to remove the brush guard and

lift the brush out of the robot.

Pull out the brush cover as shown in the diagram. Use the included

cleaning tool to remove any hairs tangled in the brush.

Note: Do not pull out the hair excessively to avoid damaging the main brush

when the hair is tightly tangled in the main brush.

Clean the Side Brush

Pull out the side brushes and use the included cleaning tool to

remove any hair tangled on the brush.

Clean the Main Wheel / Omnidirectional Wheel

Note: Use a tool such as a small screwdriver to separate the axle and the tire.

Routine Maintenance

Note: Wet cloths can damage sensitive elements within the robot and charging dock. Please use dry rags for cleaning.

Clean the LDS Laser Sensor/Edge Sensor

Clean the High Precision 3D

Robot Restarting

Clean the Cliff Sensor

If the robot stops responding or cannot be turned off, press and hold down the button

seconds to forcefully turn it off. Then press and hold the button

on.

Battery

The robot contains a high-performance lithium-ion battery pack. Please ensure that it remains

well-charged for daily use to maintain optimal battery performance. If the robot is not used for an

extended period of time, turn it off and put it away. To prevent damage from over-discharging, the

robot should be recharged at least once every three months.

Clean the Charging Contact

for 10

for 3 seconds to turn the robot