- ページ 9

掃除機 Dreame Bot L10 ProのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dreame Bot L10 Pro 14 ページ。 Robot vacuum and mop

How to Use

6. Spot Clean mode

When the robot is paused or in Standby Mode, press and hold the

button

for 3 seconds to start Spot Clean Mode. In this mode, it will

clean a square-shaped area of 1.5 ×1.5 meters directly around the

robot. When the spot cleaning is done, the robot will automatically

return to its original location and power off.

1.5 meter

Note: Activating Spot Clean Mode will end the current cleaning task of the

robot.

7. Scheduled Cleaning

You can schedule cleaning time in the Mi Home/Xiaomi Home app.

The robot will automatically start cleaning at the designated time

and then return to the charging dock to recharge when the cleaning

is done.

8. Additional App Functions

The app can be used to enable more functions such as selected room

cleaning, zone cleaning, forbidden area / virtual wall, etc.

Note:

• Follow the instructions on the app interface to use more functions.

• The version of the app might have been updated; please follow the

instructions based in the current app version.

How to Use

9. Use the Mopping Function

It is recommended that all floors are vacuumed at least three times

before the first mopping session to achieve a better cleaning effect.

1) Dampen the mop pad and wring out excess water. Slide the pad all

the way into the slot of the water tank until it is securely in place.

2) Open the water tank lid, fill the tank with water, then securely

close the lid.

Note: Do not use detergent or disinfectant.

3) Align the mopping module as indicated by the arrow, then slide it

into the back of the robot until it clicks into place. Press the button

or use the Mi Home/Xiaomi Home app to start cleaning.

Click

Note:

• It is not recommended to use the mopping function on carpets.

• Use the app to adjust the water flow as required.

4) Press the two side clips inwards and slide the water tank

backwards to separate it from the robot.

Note: When the robot is charging or not in use, remove the mopping module,

pour out all the remaining water in the tank, and clean the mop pad to prevent

mildew or odor.