ページを印刷するSPECIFIC TEST WITH INPUT
Refer to "Conditions for Testing" on page 11 before
conducting a test.
Attach a mouthpiece to the sample
1
port and select "SPECIFIC".
The breathalyser will take a clean air
sample to ensure the mouthpiece and
sensor are clear of alcohol from any
previous tests.
If no alcohol is detected, the unit
will proceed to test mode (skip to
image
2
If alcohol is detected, verify that a
clean mouthpiece is being used and
select "RETEST".
6
).
3
Use the stylus pen to input information.
3
Note: 16 characters maximum for each
input.
Select "NEXT" or "BACK" to move to the
next or previous field.
If no data fields are selected, the unit will
proceed directly to test mode.
(See page 10 to enable/disable data
fields.)
4
When the screen displays "Please
Blow", take a deep breath and blow
into the mouthpiece with a slow and
steady breath. Blow until the progress
bar reaches 100%, then stop blowing.
A click will be heard indicating a sample
has been taken.