- ページ 3
錠前 Andersen VeriLockのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Andersen VeriLock 6 ページ。 Security sensor lock
Andersen VeriLock にも： マニュアル (6 ページ), マニュアル (13 ページ), 申し込み (10 ページ), 申し込み (6 ページ), マニュアル (6 ページ), マニュアル (5 ページ), サービスマニュアル (6 ページ)
ページを印刷する4
Interior
Unlock and open bottom sash.
Desbloquee y abra la hoja inferior.
6
Lock
Cerrojo
Interior
Position VeriLock assembly around lock as shown. Fasten using #8 x 1" color matched screws provided. Do not over tighten screws.
Position VeriLock assembly around lock as shown. Fasten using #8 x 1" color matched screws provided. Do not over tighten screws.
7
Interior
Clean area on lock handle to receive lock magnet with cleaning wipe provided. Remove adhesive liner press magnet firmly on lock handle with
arrow pointing up as shown.
Clean area on lock handle to receive lock magnet with cleaning wipe provided. Remove adhesive liner press magnet firmly on lock handle with
arrow pointing up as shown.
9142195
5
Interior
Remove screws from lock and dispose of properly. Do not remove or lift lock after unscrewing.
Retire los tornillos del cerrojo y deséchelos adecuadamente. Do not remove lock after
unscrewing.
VeriLock Assembly
VeriLock Assembly
Lock Handle
Lock Handle
Lock Magnet
Lock Magnet
Adhesive Liner
Adhesive Liner
Phillips Screwdriver
Destornillador
Phillips
Lock
Cerrojo
#8 x 1" Screw
#8 x 1" Screw
3
NOTE: VeriLock
sensor is installed
on the right lock
of units with two
locks, as viewed
from the interior.
NOTE: VeriLock
sensor is installed
on the right lock
of units with two
locks, as viewed
from the interior.
Position magnet as
shown with arrow
pointing up.
Position magnet as
shown with arrow
pointing up.