- ページ 10

スピーカー Community IC6-2082/26のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Community IC6-2082/26 16 ページ。 I series

ページを印刷する

LOUDSPEAKER CABINET PAINTING PROCEDURE

I SERIES cabinets are available in standard colors of Black and White, and the

weather-resistant cabinet is Grey; custom colors may be ordered as Configured-

to-Order (CTO) items for both types of models, alleviating the need to paint your

own.

Indoor: The cabinet finish is a resilient water-based paint that makes an excellent

substrate to accept most types of paints, allowing custom colors to be applied

in the field. If you are considering painting the cabinet, we recommend ordering

the White version of the cabinet for the most predictable results when color-

matching existing colors. A Black or White replacement grille cloth kit should

also be ordered. For most custom colors, black grille cloth is recommended. The

kit also includes replacement soft plastic trim strip (to fit upper/lower edges of

grille).

Follow grille removal instructions (Figure 6a) and reserve hardware for

reattachment.

Warning: The grille edges are sharp! Use care when handling the unprotected

edges of the grille to prevent injury.

CABINET

Mask off the input panel and front face, including all drivers and ports (Figure 6b).

Paint the cabinet and allow the paint to fully cure.

Grille Retention Bar

5mm x 20mm

Socket Head

Screw

Figure 6a. Remove one retention bar, loosen that side of

the grille and then remove the other retention bar

GRILLE AND ALUMINUM RETENTION STRIPS

The grille and aluminum retention strips must be removed and

painted separately. To paint the grille, carefully remove the grille

cloth backing and the soft plastic strips protecting the top and

bottom edges (Figure 6c).

Use paint that is compatible with powder coating, and paint the

outside (front and sides) of the grille and allow the paint to fully

cure. Do not paint the cloth or rubber trim. Paint the front and

edges of the grille retainers with the same paint used on the grille.

Allow paint to fully cure before reassembling.

Page 10

Grille

Front

Rear

Quick Start Guide

Outdoor WR/WT models:

The weather-resistant models are

finished with an exterior-grade UV-

resistant grey finish, and can be

repainted with a similar spray paint.

The grille paint must be compatible

with a powder-coated surface.

Note: Please specify weather-resistant material

when ordering the grille cloth replacement kit.

Figure 6b. Mask off the internal

components and rear input panel

Figure 6c. Remove trim strips and

grille cloth

I SERIES Compact 600