Individual settings
Options buttons
You can change the spin speed and the temperature before the selected programme starts
and while it is running. The effects depend on the programme progress.
Temperature °C
You can change the displayed washing temperature. The maximum selectable temperature
depends on the current programme.
Ready in
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The Ready in- time can be set in
increments of one hour up to a maximum of 24 hours. Press the
repeatedly until the required number of hours is displayed (h = hour).
Choose
Start/Reload.
rpm (spin speed / without final spin)
You can change the displayed spin speed. The maximum selectable spin speed depends on
the model and on which programme is currently selected.
Additional functions
and overview of programmes, see page 7
SpeedPerfect
For washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load
programmes, page 7.
EcoPerfect
For saving energy with a washing performance comparable to that of
the standard programme.
Reduced Ironing Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
Aqua Plus
Increased water level and additional rinse cycle, extended washing
time. For areas with very soft water or for further enhancing the spin
result.
Childproof lock and reloading
You can lock the washing machine to prevent the functions you have
Childproof lock/
set from being changed inadvertently.
Appliance lock
ON/OFF: Press and hold the
the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES +
If you want to add additional items of laundry after the programme has
started, choose
Reload
reloading is possible.
YES +
illuminated: Reloading is possible.
NO flashes: wait until YES +
Note: do not open the door until both the YES +
NO: It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the
Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
Ready in button
Overview of
Start/Reload button for 5 seconds after
Start/Reload. The machine checks whether
light up.
symbols are lit.
Start/Reload button.
Individual settings
Signal
1. Activating the mode
for setting the signal
volume
Set to
Button signals
2. Setting the
volume for ...
* you may need to select
Setting the
the function several times.
volume*
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders, additives and cleaning agents, you
must follow the manufacturer's instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light
Do not pre-wash. If required, choose the additional function
Pre-treat any stains as necessary.
intense
Do not load as much laundry.
Choose a programme with a prewash.
Soaking
Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to
After approx. 10 minutes, press
soaking time has elapsed, press
a different programme.
Starch
Laundry should not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in
accordance with the manufacturer's instructions into fabric softener compartment
if necessary).
Dyeing/Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions! Do not use the washing machine for
bleaching clothes!
5
•
press and hold
1 step, release
1 step, the
+
display panel
lights up
Information signals
direct
1 step
Setting the
volume*
SpeedPerfect.
Cottons 30 °C and press
Start/Reload to pause the programme. Once the required
Start/Reload again to continue the programme, or select
•
Set to
Start/Reload.
(rinse first
6
ページを印刷する