Bosch Programme Table Instrukcja obsługi - Strona 5

Drukuj stronę

Bosch Programme Table Instrukcja obsługi

Individual settings

Options buttons

You can change the spin speed and the temperature before the selected programme starts

and while it is running. The effects depend on the programme progress.

Temperature °C

You can change the displayed washing temperature. The maximum selectable temperature

depends on the current programme.

Ready in

When you select the programme, the relevant programme duration is displayed. You can

delay the start of the programme before it begins. The Ready in- time can be set in

increments of one hour up to a maximum of 24 hours. Press the

repeatedly until the required number of hours is displayed (h = hour).

Choose

Start/Reload.

rpm (spin speed / without final spin)

You can change the displayed spin speed. The maximum selectable spin speed depends on

the model and on which programme is currently selected.

Additional functions

and overview of programmes, see page 7

SpeedPerfect

For washing in a shorter time with a washing outcome comparable to

that of the standard programme. Maximum load

programmes, page 7.

EcoPerfect

For saving energy with a washing performance comparable to that of

the standard programme.

Reduced Ironing Special spin sequence with subsequent fluffing. More gentle final spin

- residual moisture in the laundry slightly increased.

Aqua Plus

Increased water level and additional rinse cycle, extended washing

time. For areas with very soft water or for further enhancing the spin

result.

Childproof lock and reloading

You can lock the washing machine to prevent the functions you have

Childproof lock/

set from being changed inadvertently.

Appliance lock

ON/OFF: Press and hold the

the start/end of the programme.

Note: The childproof lock can remain activated until you wish to start

the next programme, even after switching off the machine.

Then you can deactivate the childproof lock before the start of the

programme and activate it again as necessary once the programme

has started.

YES +

If you want to add additional items of laundry after the programme has

started, choose

Reload

reloading is possible.

YES +

illuminated: Reloading is possible.

NO flashes: wait until YES +

Note: do not open the door until both the YES +

NO: It is not possible to reload.

Note: For safety reasons, the washing machine door remains locked

when the water level and/or temperature is high, or during spinning.

To continue the programme, press the

Start/Reload

To start the programme or to subsequently load additional laundry, and to activate/deactivate

the childproof lock.

Ready in button

Overview of

Start/Reload button for 5 seconds after

Start/Reload. The machine checks whether

light up.

symbols are lit.

Start/Reload button.

Individual settings

Signal

1. Activating the mode

for setting the signal

volume

Set to

Button signals

2. Setting the

volume for ...

* you may need to select

Setting the

the function several times.

volume*

Important information

Protecting the laundry and the machine

– When determining the dosage of all washing powders, additives and cleaning agents, you

must follow the manufacturer's instructions.

– Empty pockets.

– Look out for metal items (paperclips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Laundry with varying degrees of soiling

Wash new items of clothing separately.

light

Do not pre-wash. If required, choose the additional function

Pre-treat any stains as necessary.

intense

Do not load as much laundry.

Choose a programme with a prewash.

Soaking

Load laundry of the same colour

Pour soaking agent/detergent into compartment II in accordance with the manufacturer's

instructions. Turn the programme selector to

After approx. 10 minutes, press

soaking time has elapsed, press

a different programme.

Starch

Laundry should not be treated with fabric softener.

Starching is possible in all wash programmes if liquid starch is used. Pour the starch in

accordance with the manufacturer's instructions into fabric softener compartment

if necessary).

Dyeing/Bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel.

Always follow the dye manufacturer's instructions! Do not use the washing machine for

bleaching clothes!

•

press and hold

1 step, release

1 step, the

display panel

lights up

Information signals

direct

1 step

Setting the

volume*

SpeedPerfect.

Cottons 30 °C and press

Start/Reload to pause the programme. Once the required

Start/Reload again to continue the programme, or select

•

Set to

Start/Reload.

(rinse first