- ページ 4

計測機器 ANDILOG CENTORMETER EASYのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ANDILOG CENTORMETER EASY 16 ページ。 Torque analyzer v1.0

2. Recommendation before first use

a. Battery

The battery reaches its maximum capacity after several charges. This is very important! A new

gauge has a battery that does not have its full capacity at the first power on. The gauge will shut

down automatically if the battery is too low.

The battery life is 8 hours under a normal use. The gauge should be charged after normal use.

You should charge it every 3 weeks, to ensure a maximum life time of the batteries.

It is recommended to use the original power adaptor supplied by ANDILOG Technologies. The

power adaptor has the following specifications: 12V, 1.5A

In spite of its mechanical protection, sensor overload can damage the

instrument. The instrument stops if the capacity has been exceeded 10 times.

You have to return it to ANDILOG TECHNOLOGIES for checking.

It is important that measured values are under 90% of the sensor capacity.

c. Test bench

The unit can be affixed to a test bench via the four holes on the unit's base.

 Working Temperature: 0°C to +35°C

 Stock Temperature: -20°C to +45°C

 Humidity: 5% to 95%

 Altitude: 3000m

Sensor

Conditions

- 3 -

Operating manual – V1.0

CENTORMETER EASY