ページを印刷するDN:KD-5904-SMSY01 V3.0
3. CLOCK AND DATE ADJUSTMENT
When the monitor is turned off, hold on the buttons "Mode" for 3 seconds and the
a.
number of the year will blink on and off on the LCD display. In this mode, when the
button "Mode" is pressed and released, the day of the month will blink. Press and
release the button "Mode" again and the month will blink, Press and release the
button "Mode" again and the hours will blink, Press and release the button "Mode"
again and the minutes will blink.
b. When the year, month, day, hours or minutes that you wish to set is blinking, each
time that you press and release the button "+" the displayed number will increase by
one and button "-" decrease by one. By holding down the button "+" / "-" the displayed
number will continue to increase/decrease. Once you set the correct year, press and
release the button "Mode". Then repeat this process to set the month, day, hour,
and minutes.
c. Note that the hours are displayed as 1 through 24 rather than 1AM through 12 Noon
and 1PM through 12 Midnight.
d. After setting the minutes, when you press and release the button "Mode", you exit the
time and date adjusting mode and the numbers on the LCD display will no longer
blink.
e. When batteries are replaced, the time and date must be reset.
4. VOICE SETTING
a. Voice processor language selection: When the monitor is in Clock Mode, press and
hold down the button "MEM" until "L1" appears on the LCD display and the voice
announces corresponding Language. If you continue to hold the button "MEM" down,
other language will announced and the corresponding language code will appear on
the LCD display. When the language of choice appears and is announced, release
the button "MEM".
7/19
Operation Guide
JS-KD5904-03-V2.0