Andon KD-5904 Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Монитор артериального давления Andon KD-5904. Andon KD-5904 19 страниц.

DN:KD-5904-SMSY01 V3.0

3. CLOCK AND DATE ADJUSTMENT

When the monitor is turned off, hold on the buttons "Mode" for 3 seconds and the

number of the year will blink on and off on the LCD display. In this mode, when the

button "Mode" is pressed and released, the day of the month will blink. Press and

release the button "Mode" again and the month will blink, Press and release the

button "Mode" again and the hours will blink, Press and release the button "Mode"

again and the minutes will blink.

b. When the year, month, day, hours or minutes that you wish to set is blinking, each

time that you press and release the button "+" the displayed number will increase by

one and button "-" decrease by one. By holding down the button "+" / "-" the displayed

number will continue to increase/decrease. Once you set the correct year, press and

release the button "Mode". Then repeat this process to set the month, day, hour,

and minutes.

c. Note that the hours are displayed as 1 through 24 rather than 1AM through 12 Noon

and 1PM through 12 Midnight.

d. After setting the minutes, when you press and release the button "Mode", you exit the

time and date adjusting mode and the numbers on the LCD display will no longer

blink.

e. When batteries are replaced, the time and date must be reset.

a. Voice processor language selection: When the monitor is in Clock Mode, press and

hold down the button "MEM" until "L1" appears on the LCD display and the voice

announces corresponding Language. If you continue to hold the button "MEM" down,

other language will announced and the corresponding language code will appear on

the LCD display. When the language of choice appears and is announced, release

the button "MEM".

7/19

Operation Guide

JS-KD5904-03-V2.0