- ページ 10
血圧モニター Andon KD-723のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Andon KD-723 18 ページ。 Electronic sphygmomanometer
ページを印刷するPicture 8
Alternatively, press "MEM" button in Clock Mode to display the stored results. The
b.
current memory bank will blink and the amount of results in this bank will be
displayed.
See picture 8-1.
Confirm your selection by pressing "MEM" button. After selecting the
picture 8-2.
memory bank, the LCD will display the average value of all results in this bank,
picture
8-3.
If no result stored, LCD will show dashes as
Picture 8-3
When the average is displayed, press the "MEM" button, the most recent result will
c.
be displayed.
shown separately. Irregular heartbeat symbol (if any) will blink. Press "MEM" button
again to review the next result.
"MEM" button displays the respective results measured previously.
Picture 8-5
e.
When displaying the stored results, the monitor will turn off automatically after 1
minute of no operation. You can also press the button "START" to turn off the monitor
manually.
9. SYNCHRONIZING STORED RESULTS
a. In Clock Mode, press "MEM" button, the monitor will wait Bluetooth connect and
Bluetooth symbol flashing after confirming the group.
symbol will stop flashing when Bluetooth is connected.
b. When Bluetooth is disconnected, the monitor will turn off automatically after 1 minute
of no operation. You can also press the "START/STOP" button to turn off the monitor
manually.
10. DELETING MEASUREMENTS FROM THE MEMORY
When any average value is displaying, keeping on pressing button
"MEM" for three seconds, all results will be deleted after three "beep".
Picture 8-1
Press "START" button to change over to other bank.
See picture
8-5.
Followed by, the blood pressure and pulse rate will be
See picture 8-6.
9/17
Picture 8-2
picture
8-4.
Picture 8-4
In this way, repeatedly pressing the
Picture 8-6
See picture
See picture 8-5.
Template version:1
See
See
8-3.
Bluetooth