- ページ 7

顕微鏡 Andonstar A1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Andonstar A1 11 ページ。 Usb digital microscope
Andonstar A1 にも：ユーザー紹介マニュアル (9 ページ)

A1:

See the Pictureabove for bracket installation.

V160:

Install the standing pillar to the screw hole at the corner of the bottom plate. After installing it in place, you can turn

the "vertical scope arm fixing knob" (see Picture1-V160) to adjust different angles according to your needs.

Object distance adjustment:

loosen the scope arm fixing knob, adjust the standing pillar "lifting knob" (see Picture1-V160) to obtain different

object distances, and tighten the "scope arm fixing knob".

A1 Hose:

Take out the screw at the bottom of the hose, install the hose to the bottom plate, and then fix it with a screwdriver.

5. Product configuration instructions

1. 1 digital microscope host

2. 1 each for casing, white earmuffs, sleeve, black earmuffs, and side lens

① Casing: It protects the body when inspecting the bottom of the slit, deep in the pipe, and when the microscope needs

to be placed in other objects.(This accessory is not waterproof)

 Black earmuffs: Used to check holes with a diameter smaller than the body diameter (12mm).

Black can block the external stray light, making the center of the picture brighter.

- 6 -