- ページ 5

換気フード Electrolux ECS9181GのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux ECS9181G 7 ページ。

ページを印刷する

(Fig.9)

Assemble the flue cover onto the hood body make sure

it on the correct position.

Fig.9

Self-clean

Self-clean instruction

This product is equipped with self-clean technology.

The self-clean function will be automatically triggered

after the motor works for 15hours.

User also can tap the self-clean button to trigger the

self-clean function.

The red indicator will start glowing during the cleaning

process.

The time period for Self-clean is 10 to 15 minutes. The

product can be used during self-clean.

Glass

●Glass should be cleaned every week in order to

keep the shiny

Grease filter

●

The grease filter should be cleaned frequently (

every two months of operation, or more frequently

for heavy use). Use a warm detergent solution.

●

Grease filter is washable

●

Remove the grease filter by unscrewing 2pcs

screws. This will disengage the filter from the hood

. Tilt the filter downward and remove(Fig.10)

●

Wash the filter , taking care not to bend them.

Allow them to be dried before refitting.

●

To install the grease filter , push filter into position

and release . Fix the glass panel to the two hinges

and refix one screw .

Note: To replace the filter, please let the hood on

suction mode before cutting off the electrical

supplier and don't open the glass panel by hand.

Fig.10

Replacing the lamp

Unfixed screws on the switch cover below front glass and

dismantle the switch cover with screwdriver

Replace the damaged LED, only use LED DC 12V,4W Max

Note:

We recommend only using lamps of the same

specification as the ones being replaced.

WARNING: .

1. Always switch off the electrical supply before carrying

out any operation on the appliance.

2. Only a qualified and trained service technician can

undertake the work of bulbs replacement and servicing.

Changing the lamp