Electrolux ECS9181G 사용자 설명서 - 페이지 5
{카테고리_이름} Electrolux ECS9181G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ECS9181G 7 페이지.
페이지 인쇄(Fig.9)
Assemble the flue cover onto the hood body make sure
it on the correct position.
Fig.9
Self-clean
Self-clean instruction
This product is equipped with self-clean technology.
The self-clean function will be automatically triggered
after the motor works for 15hours.
User also can tap the self-clean button to trigger the
self-clean function.
The red indicator will start glowing during the cleaning
process.
The time period for Self-clean is 10 to 15 minutes. The
product can be used during self-clean.
Glass
●Glass should be cleaned every week in order to
keep the shiny
Grease filter
●
The grease filter should be cleaned frequently (
every two months of operation, or more frequently
for heavy use). Use a warm detergent solution.
●
Grease filter is washable
●
Remove the grease filter by unscrewing 2pcs
screws. This will disengage the filter from the hood
. Tilt the filter downward and remove(Fig.10)
●
Wash the filter , taking care not to bend them.
Allow them to be dried before refitting.
●
To install the grease filter , push filter into position
and release . Fix the glass panel to the two hinges
and refix one screw .
Note: To replace the filter, please let the hood on
suction mode before cutting off the electrical
supplier and don't open the glass panel by hand.
Fig.10
Replacing the lamp
Unfixed screws on the switch cover below front glass and
dismantle the switch cover with screwdriver
Replace the damaged LED, only use LED DC 12V,4W Max
Note:
We recommend only using lamps of the same
specification as the ones being replaced.
WARNING: .
1. Always switch off the electrical supply before carrying
out any operation on the appliance.
2. Only a qualified and trained service technician can
undertake the work of bulbs replacement and servicing.
Changing the lamp