- ページ 11
換気フード Electrolux RH30WC55GSのPDF 設置・使用・お手入れマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux RH30WC55GS 20 ページ。 30” et 36” hotte aspirante
Electrolux RH30WC55GS にも： 工場部品カタログ (4 ページ), パンフレット＆スペック (2 ページ), 設置・使用・お手入れマニュアル (20 ページ), 設置・使用・お手入れマニュアル (21 ページ), 設置・使用・お手入れマニュアル (20 ページ), (設置・使用・お手入れガイド (25 ページ), (フランス語) 設置・使用・保守マニュアル (21 ページ)
ページを印刷する
• Remove the hood.
• Drive "lower" wood screws, by hand. Remove
screws.
• Mount the hood onto the "upper" screws.
• Drive and tighten the "upper" wood screws, by
hand.
• Drive and tighten the "lower" wood screws, by
hand.
Connecting the ductwork
Connecting the ductwork
Connecting the ductwork
Connecting the ductwork
Connecting the ductwork
• Install ductwork, making connections in the
direction of airflow as illustrated.
• Push duct over the exhaust outlet.
• Wrap all duct joints and the flange connections
with duct tape for an airtight seal.
• Make the same connection in the wall or ceiling
vent exit.
Duct tape
over seam
Air deflector installation
Air deflector installation
Air deflector installation
Air deflector installation
Air deflector installation
(Recirculating accessories)
(Recir
(Recir
(Recir
(Recir
• Assemble the air deflector with the duct cover
• Measure from the bottom of the air deflector to
Airflow
• Cut the duct at the measured size.
• Uninstall the air deflector removing the 4
• Slip the duct onto the bottom of the deflector.
• Place the assembled deflector and duct over the
• Assemble the air deflector to the duct cover
Installing the hood
culating accessories)
culating accessories)
culating accessories)
culating accessories)
bracket with 4 assembly screws provided as
shown.
the bottom of the hood outlet, as shown.
Dimension to measure
assembly screws.
exhaust outlet from the hood.
bracket with 4 assembly screws provided as
shown.
11
11
11
11
11