- ページ 10

換気フード Electrolux RH30WC55GSのPDF 設置・使用・お手入れマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux RH30WC55GS 20 ページ。 30” et 36” hotte aspirante
Electrolux RH30WC55GS にも：工場部品カタログ (4 ページ), パンフレット＆スペック (2 ページ), 設置・使用・お手入れマニュアル (20 ページ), 設置・使用・お手入れマニュアル (21 ページ), 設置・使用・お手入れマニュアル (20 ページ), (設置・使用・お手入れガイド (25 ページ), (フランス語) 設置・使用・保守マニュアル (21 ページ)

ページを印刷する

Installing the hood

Install framing for hood support

• If drywall is present, mark the screw hole

locations. Remove the template.

• Cut away enough drywall to expose 2 vertical

studs at the holes location indicated by the

template.

Install two horizontal supports at least 1" x 6"

between two wall studs at the bottom and top

mounting holes installation location.

• The horizontal support must be flush with the

room side of the studs.

Use cleats behind both sides of the support to

secure to wall studs.

• Reinstall drywall and refinish.

IMPOR

IMPORT T T T T ANT

ANT

ANT- - - - - Framing must be capable of

IMPOR

ANT

supporting 100 lbs.

Framing must be capable of

8-1/2"min. opening for ductwork

View From Rear

1"x6" Min.

Mounting

Support

Centerline of

Installation

Space

Mounting the hood

2 people are required to lift and position the hood

onto the mounting screws.

• Place the template on the wall along the horizon-

tal line, make sure the template is leveled and

centered with the centerline.

• Mark "upper" screw holes locations in the wall.

• IMPORTANT. Check to be sure that hole locations

are leveled and correctly centered by the vertical

centerline.

• Drive "upper" wood screws by hand. Leave ¼ " of

distance between the screw head and the wall.

• Remove the grease filter and mount the hood

onto the "upper" screws.

Cleats

• Mark "lower" wood screw holes locations in the

wall using a pencil.