- ページ 8

換気フード Electrolux Vent HoodのPDF 取扱説明書取付説明書をオンラインで閲覧またはダウンロードできます。Electrolux Vent Hood 16 ページ。

Installation

Prepare the hood

NOTE

On stainless steel hoods, carefully remove the

plastic protective film from all exterior surfaces

of the hood and decorative flues, prior to final

installation.

Fix the electrical mounting plate with (2) 3.9x9.5mm

screws and (2) serrated washers. Fig. 3.

ELECTRICAL MOUNTING

PLATE

DUCTED CONFIGURATION

Mount the discharge collar above the hood. Fig. 4.

NON- DUCTED CONFIGURATION

NOTE

Purchase a Non-ducted recirculation KIT from

your dealer (Model DFKTPC40EC).

1. Insert the non-ducted recirculation plenum through

the support frame openings. Fig. 5.

2. Through the support frame openings fit the duct

connector to the plenum locking it with a turning

movement. Fig. 6.

3. Fix a 5" duct to the duct connector of the non-ducted

recirculation plenum. Fig.6.

4. Mount the 6"/5" adapter above hood. Fig. 7.

MOUNTING

SCREWS

(3.9x9.5mm)

FIG. 3

5" DUCT

DISCHARGE

COLLAR

FIG. 4

NON-DUCTED

RECIRCULATION PLENUM

FRONT

DUCT

CONNECTOR

6"/5"

ADAPTER

FIG. 5

FIG. 6

FIG. 7