- ページ 26

掃除機 Electrolux EL4300のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux EL4300 37 ページ。

3.4 Nozzle power supply interface

For vacuum cleaners without AUTO mode function:

button 1

turns on or off the cleaner

button 2

turns on or off the nozzle motor (handled by the

Aeropro PCB)

button 3

increases the cleaner power in up to 5 power steps

button 4

decreases the cleaner power in up to 5 power steps

The remote control for the Aeropro 230V/110V active system are a two wire connected PCB

assembled in the cleaners bent end. From the remote control it is possible to control the cleaner functions.

Note: PCB working with live voltage – 230/110V.

When the main is connected, and the cleaner is in standby mode. This is indicated by "0" on the LED

display.

When changing to a new RF transmitter (or bent-end with new transmitter), the cleaner must learn the

new identity of the new transmitter.

The learning process is done in following way:

Press ON/OFF button on cleaner and keep it pressed while inserting the main plug.

Keep the ON/OFF button pressed until the segment display LED indicates "C", the cleaner is now in

RF learning mode. Release the ON/OFF button.

On the remote control press the ON/OFF button.

If the cleaner have received the new RF remote address the segment LED will first indicate "L",

learning, and after that "F", programming its memory. After successful learning process the display

will show "0"

Start the cleaner either with the remote control or on the cleaner.

Publication number

Rev. xx

Month/year

PR - 26/37