- ページ 4
扇風機 Atlas Melody AC-MGM2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Atlas Melody AC-MGM2 9 ページ。 Wall mounted fan
ページを印刷する
MOUNTING/INSTALLLATION
OF THE FAN AND MAKING
THE ELECTRICAL
CONNECTIONS
Before touching a screw driver thoroughly
read these installation instructions.
Your new wall fan will require a grounded
electrical supply line of 220-240V~, 50/60Hz
circuit. The junction box must be securely
anchored and capable of withstanding a
load of at least 45 lbs (20.4 Kgs).
WARNING/CAUTION: Before installing new
wall junction box turn off power at service
panel.
1. Attach junction box securely to building
structure. Use provided hardware. Caution:
Tighten screws well. See Fig. 1.
2. Installing the hanger bracket to the
junction box with 2 screws provided.(Fig. 2)
3. Verify that the set screws in decorative
canopy are fully retracted. Not retracting
them will cause unsightly scratches in the
beautiful finish of the goose neck during
installation. Leave the protective plastic
sleeves in place on the goose net. (Fig. 3)
4. Thread the wires from the fan through the
barrel of the hanger bracket, and then pass
through the concave on the hanging bracket
for the wire connection:
Screws
Side mount
wall junction box
Allen wrench
Screws
Hanger
bracket
3
Figure 1
Screws
Hanger bracket
Figure 2
Canopy
Figure 3