Atlas Melody AC-MGM2 사용 설명서 - 페이지 4

{카테고리_이름} Atlas Melody AC-MGM2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Melody AC-MGM2 9 페이지. Wall mounted fan

MOUNTING/INSTALLLATION

OF THE FAN AND MAKING

THE ELECTRICAL

CONNECTIONS

Before touching a screw driver thoroughly

read these installation instructions.

Your new wall fan will require a grounded

electrical supply line of 220-240V~, 50/60Hz

circuit. The junction box must be securely

anchored and capable of withstanding a

load of at least 45 lbs (20.4 Kgs).

WARNING/CAUTION: Before installing new

wall junction box turn off power at service

panel.

1. Attach junction box securely to building

structure. Use provided hardware. Caution:

Tighten screws well. See Fig. 1.

2. Installing the hanger bracket to the

junction box with 2 screws provided.(Fig. 2)

3. Verify that the set screws in decorative

canopy are fully retracted. Not retracting

them will cause unsightly scratches in the

beautiful finish of the goose neck during

installation. Leave the protective plastic

sleeves in place on the goose net. (Fig. 3)

4. Thread the wires from the fan through the

barrel of the hanger bracket, and then pass

through the concave on the hanging bracket

for the wire connection:

Screws

Side mount

wall junction box

Allen wrench

Screws

Hanger

bracket

Figure 1

Screws

Hanger bracket

Figure 2

Canopy

Figure 3