- ページ 7

屋外倉庫 ABSCO SHEDS 15151SKのPDF 組立・取扱説明書をオンラインで閲覧またはダウンロードできます。ABSCO SHEDS 15151SK 20 ページ。 N3/c1 frame kit
ABSCO SHEDS 15151SK にも：組立マニュアル (20 ページ)

BOXING FRAME SECTIONS

1. All frame sections have one side length of

38mm and another at 40mm.

3. Slide opposing sides together so that

each frame section fi ts neatly inside the

other.

5. Fix with tek screws.

Use tek screws to fi x the two sections and complete a boxed frame member as shown. Make sure that

you alternate tek screw position on opposing sides of the boxed sections. Align tek screws 296mm

apart. This is approximately 2 sheet corrugations in distance. If spaced correctly the screw heads will

line up with corrugations of the sheets and will make for a fl ush fi nish against the wall or roof.

NOTE:

- Only the horizontal wall frame sections are to be boxed.

- Do not screw any boxed sections until they have been correctly sized as the specific step instructs.

- Roof section, door frames and upright door studs are singular pieces.

- Use self drilling tek screws for all assembly and installation of these sections.

Absco Industries

Assembly Instruction Manual

N3/C1 FRAME KIT

FOR 1.5m WIDE TO

1.5m DEEP MODELS

Model: CYC15

2. Slide the 38mm side into the 40mm side

as shown.

4. Apply fi rm pressure to each side of the

boxed section to fi rmly lock it into position.

02/03/2021

1.0