- ページ 13

エアクリーナー Advanced PureAir Newport ULTRAのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Advanced PureAir Newport ULTRA 19 ページ。

Reset the "REPLACE FILTER" indicator

Please refer to instructions on page 7 for resetting after

replacement, otherwise the indicator will remain on screen.

Cleaning the Dust Collector Cell

The dust collector cell may not require cleaning if "arcing" occurs. Arcing is a sharp snapping sound that

occurs when large particles are collected in the dust collector cell or the appliance used in over damp

rooms.

The dust collector cell needs cleaning when:

"CLEAN CELL" indicator appears or blinks on the screen

The dust collector cell is too dirty or continuous arcing occurs

Remove the front cover, dust

collector cell and pre-ﬁlter

·Please refer to page 9 for detailed instructions

on the removal of the dust collector cell and

pre-ﬁlter.

CLEANING AND MAINTENANCE

Caution

Soak the dust collector cell before

cleaning

Place the dust collector cell in sink, bathtub or

other location where cleaner can cover every

surface.

Tough residue such as tar from tobacco

smoke does not wash away easily:

① Use mild detergent

② Use warm water(below 40℃) only!