Advanced PureAir Newport ULTRA Kullanım Kılavuzu - Sayfa 13
Hava Temizleyici Advanced PureAir Newport ULTRA için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Advanced PureAir Newport ULTRA 19 sayfaları.
Sayfayı Yazdır
Reset the "REPLACE FILTER" indicator
Please refer to instructions on page 7 for resetting after
replacement, otherwise the indicator will remain on screen.
Cleaning the Dust Collector Cell
The dust collector cell may not require cleaning if "arcing" occurs. Arcing is a sharp snapping sound that
occurs when large particles are collected in the dust collector cell or the appliance used in over damp
rooms.
The dust collector cell needs cleaning when:
"CLEAN CELL" indicator appears or blinks on the screen
The dust collector cell is too dirty or continuous arcing occurs
Remove the front cover, dust
1
collector cell and pre-filter
·Please refer to page 9 for detailed instructions
on the removal of the dust collector cell and
pre-filter.
CLEANING AND MAINTENANCE
Caution
Soak the dust collector cell before
2
cleaning
Place the dust collector cell in sink, bathtub or
other location where cleaner can cover every
surface.
Tough residue such as tar from tobacco
smoke does not wash away easily:
① Use mild detergent
② Use warm water(below 40℃) only!
11