- ページ 13

スピーカー Bose Acoustimass Bass SystemのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Acoustimass Bass System 18 ページ。 Wireless bass module
Bose Acoustimass Bass System にも：オーナーズマニュアル (11 ページ), オーナーズマニュアル (13 ページ), オーナーズマニュアル (6 ページ), オーナーズマニュアル (24 ページ), クイック・スタート・マニュアル (2 ページ)

Figure 9

Use either the optical or coaxial

digital sound cables and

connections for Dolby Digital

sound.

AM194452_06_V.pdf

Be sure to get the Dolby Digital signal

To be sure that the Dolby Digital or other digital signal from your DVD player reaches your

receiver, connect its digital sound output to the digital sound input on your receiver. You must

use a coaxial cable, with RCA connectors on each end, or an optical (Toslink) cable that has

unique, "square" cable ends. See Figure 9. Be sure to connect the digital sound jacks; these

are in addition to the traditional analog connections that carry the Dolby Pro-Logic signal.

Many DVD players have a switch on the back which you must place in the digital position. If

you cannot find such a switch, there may be an on screen menu where you must select digital

audio.

You must also be sure to select Dolby Digital at your receiver's front panel or remote control.

For example, when playing a movie on a DVD, you must select a video output, in this case

DVD, and an audio output, Dolby Digital. You may also have to set up the digital signal using

the receiver's front panel or on-screen menu. Please consult your receiver owner's manual for

specific details.

October 22, 2001

Using Your Acoustimass

AC-3

PLAY IN

DIGITAL

(OPTICAL)

AC-3

PLAY IN

DIGITAL

(OPTICAL)

(COAXIAL)

FRONT SPEAKERS

15 Speakers

PLAY IN

(COAXIAL)

SURROUND SPEAKERS

REAR

CENTER