- ページ 14

スピーカー Bose Acoustimass Bass SystemのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Acoustimass Bass System 18 ページ。 Wireless bass module
Bose Acoustimass Bass System にも: オーナーズマニュアル (11 ページ), オーナーズマニュアル (13 ページ), オーナーズマニュアル (6 ページ), オーナーズマニュアル (24 ページ), クイック・スタート・マニュアル (2 ページ)

Bose Acoustimass Bass System オーナーズマニュアル
Maintaining Your Acoustimass

Troubleshooting

Problem
System does not function at all
No sound
No sound from cube arrays
Sound is distorted
No bass
Not enough or too much bass
No surround-sound

Customer service

Cleaning the speakers

12
®
15 Speakers
If you have a problem with your Acoustimass 15 speakers, turn off your sound source and try
the solutions below. If you still have a problem, contact your Bose
service. To contact Bose directly, refer to the inside back cover of this guide.
What to do
Make sure the receiver and Powered Acoustimass module are plugged
into an operating AC wall outlet and that the units are turned on.
Be sure to select a source at the receiver (video, CD, DVD, tuner).
Check the speaker connections.
Turn the Powered Acoustimass module ON.
For digital sound, be sure a coaxial or optical cable connects the digital
output of the DVD player with the digital input on your receiver.
Be sure the audio source selected is correct. For example: select DVD
audio on your receiver and player for DVD sound.
Disconnect any headphones.
Increase the volume.
Be sure the Powered Acoustimass module is plugged in and turned on.
Make sure speaker wire is not damaged.
Reduce the volume of external components connected to the receiver.
Make sure the speaker connections at the receiver or amplifier are correct
(+ to + and – to –).
Move the Powered Acoustimass module closer to a wall or corner to
increase bass. Move it farther away from a wall or corner to decrease bass.
Adjust the LFE level control.
Be sure your receiver is processing a signal from a Hi-Fi VCR, stereo TV,
laserdisc, or DVD player, or other surround-sound source. If you are using
the Dolby Pro-Logic mode, check that surround-sound is turned ON. If
you are using Digital programming, verify that the settings are correct at the
receiver. Be sure the source material (DVD, laser disc, or broadcast pro-
gramming) is Dolby Digital encoded.
For additional help in solving problems, contact Bose customer service. See the inside back
cover for Bose customer service offices and phone numbers.
The cabinets of your Acoustimass 15 speaker system may be cleaned with a soft damp cloth.
Do not use any sprays near the system or allow liquids to spill into any openings. Also, do not
use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
The grille assemblies on the cube arrays may be carefully vacuumed, if necessary. Please
note that the drivers are located directly behind the grille cloth, and are easily damaged if
reasonable care is not taken.
October 22, 2001
®
dealer to arrange for
AM194452_06_V.pdf