- ページ 5
ドリル Atlas Copco PHE 26 RAのPDF 修理指示をオンラインで閲覧またはダウンロードできます。Atlas Copco PHE 26 RA 12 ページ。
ページを印刷するDismantling the
1 Loosen the four screws (1) and remove
extraction
the front part (3) of the extraction
housing
housing together with the end shield (2)
from the rear part (7) of the extraction
housing.
piece (4).
2 Pull off the gasket (5) and remove
remaining silicon from the aspiration hole
(9).
3 Loosen the four screws (6) and remove
the rear part (7) of the extraction housing
together with the armature from the
motor housing (8).
Dismantling the
1 To press the turbine wheel (5) from the
front part of the
end shield (1), press the arbor press to
extraction
the driving pinion (4).
housing
2 Remove the end shield (1).
3 Unscrew the retaining disk (3) and
remove the felt washers (2).
Dismantling the
1 Unscrew and remove the end shield cover
end shield
(5).
2 Remove the bearing (4) and the sealing
sleeve (3).
3 If necessary, remove the sealing
washer (2).
Take care not to loose the thrust
Repair Instruction No. 174.3/95
1 2
3
4 5
1
PHE 26 RA
6
7
8
13
2
3
4
5
1 4
1
2
3 4
PAGE
5
15