- ページ 7

グラインダー Atlas Copco 8423031287のPDF 製品取扱説明書をオンラインで閲覧またはダウンロードできます。Atlas Copco 8423031287 12 ページ。 Die grinder

ページを印刷する

G2427 S180

WARNING Failure to follow correct working practices can result in se-

rious injury or death

Ensure that the workpiece is properly supported

►

Ensure that sparks do not cause a hazard to people or materials

►

There is a risk of electrostatic discharge if the tool is used on plastic and

►

other non-conductive materials

Personal protective equipment must be used as described in Section Per-

►

sonal protective equipment

Slip/Trip/Fall is a major cause of serious injury or death. Watch out for

►

excess hose left on the walking or work surface

Proceed with care in unfamiliar surroundings. Hidden hazards may exist,

►

such as electric or other utility lines

Maintain a balanced body position and firm footing

►

React quickly to excessive vibration due to damaged, or improperly

►

mounted insert tool

Keep away from rotating drive spindle and abrasives. Rotation may con-

►

tinue for several seconds after the throttle has been released. Do not lay

the tool down until rotation has stopped

Observe that stored compressed air in the hose may cause an accidental

►

start

Release control device if the energy supply should fail

►

Maintenance

Rust protection and internal cleaning

Water in the compressed air, dust and wear particles cause rust and sticking of

vanes, valves etc.

This can be solved by lubricating with oil (a few drops), running the machine

for 5-10 seconds and wiping off excess oil with a cloth. Do this before longer

standstills.

Lubrication

The front motor ball bearing should be lubricated with grease in conjuction with

the regular overhaul of the machine.

For flexible spindle extension – When fitting the extended spindle – apply 0.5

of grease type "Lubricating Engineers LE3752" (or EP grease) at the bot-

tom of the hole in the collet holder.

Lubricating guide

Use lubricants of good quality. The oils and greases listed in the lubrication ta-

ble are examples of lubricants that can be recommended.

Brand

Castrol

General purpose

Bearings

Energrease LS-EP2

Spheerol EP L2

Safety and operating instructions

Air lubrication

Energol E46