- ページ 29

スピーカーシステム Bose CineMate GS Series IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose CineMate GS Series II 50 ページ。 Digital home theater speaker system
Bose CineMate GS Series II にも: コード一覧 (28 ページ), クイック・セットアップ・マニュアル (2 ページ), オーナーズマニュアル (38 ページ), (ユーザーガイド (32 ページ)

Bose CineMate GS Series II オーナーズマニュアル
English
Deutsch
Español

Troubleshooting

Problem
No power
• Unplug the Acoustimass
• Make sure the power cord is inserted securely into the Acoustimass module.
• Reconnect the power cord firmly into an operating AC wall outlet. The green LED should flash 10 times,
then extinguish (the system will then be in standby).
• Make sure the interface module is plugged into the Acoustimass module properly.
• Make sure you use the remote control to power on the system.
No sound
• Make sure the CineMate
lit when the system is on.
• Increase the volume.
• If your system is a CineMate GS series II, make sure you pressed the remote button for the source you want
to hear.
• Check to see if the TV is muted. If so, press the TV remote control Mute button to unmute it.
• Make sure the interface module and speaker cables are both firmly connected to the Acoustimass module.
• Check the connections on the back of the speakers.
• Check that the correct TV Video input has been selected. See "Selecting the TV input" on page 20.
• Check the connections from the interface module to the TV or other source.
• Check that the TV's audio output is enabled. See your TV owner's guide for information.
• If the TV's audio output is VARIABLE (VAR), make sure the TV's internal speakers are turned off and the TV
volume is turned up.
• If using a sound source other than the TV, check to ensure that the device is playing source material.
Français
Italiano
Nederlands
®
module power cord from the AC wall outlet for one minute.
®
system is turned on. The green LED on the front of the interface module should be
Svenska
What to do
C
M
ARE AND
AINTENANCE
27