Bose CineMate GS Series II 소유자 매뉴얼 - 페이지 29

{카테고리_이름} Bose CineMate GS Series II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose CineMate GS Series II 50 페이지. Digital home theater speaker system
Bose CineMate GS Series II에 대해서도 마찬가지입니다: 코드 목록 (28 페이지), 빠른 설정 매뉴얼 (2 페이지), 소유자 매뉴얼 (38 페이지), (영어) 사용자 가이드 (32 페이지)

페이지 인쇄

English

Deutsch

Español

Troubleshooting

Problem

No power

• Unplug the Acoustimass

• Make sure the power cord is inserted securely into the Acoustimass module.

• Reconnect the power cord firmly into an operating AC wall outlet. The green LED should flash 10 times,

then extinguish (the system will then be in standby).

• Make sure the interface module is plugged into the Acoustimass module properly.

• Make sure you use the remote control to power on the system.

No sound

• Make sure the CineMate

lit when the system is on.

• Increase the volume.

• If your system is a CineMate GS series II, make sure you pressed the remote button for the source you want

to hear.

• Check to see if the TV is muted. If so, press the TV remote control Mute button to unmute it.

• Make sure the interface module and speaker cables are both firmly connected to the Acoustimass module.

• Check the connections on the back of the speakers.

• Check that the correct TV Video input has been selected. See "Selecting the TV input" on page 20.

• Check the connections from the interface module to the TV or other source.

• Check that the TV's audio output is enabled. See your TV owner's guide for information.

• If the TV's audio output is VARIABLE (VAR), make sure the TV's internal speakers are turned off and the TV

volume is turned up.

• If using a sound source other than the TV, check to ensure that the device is playing source material.

Français

Italiano

Nederlands

module power cord from the AC wall outlet for one minute.

system is turned on. The green LED on the front of the interface module should be

Svenska

What to do

ARE AND

AINTENANCE