- ページ 17

スピーカーシステム Bose CineMate GS Series IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose CineMate GS Series II 38 ページ。 Digital home theater speaker system
Bose CineMate GS Series II にも：コード一覧 (28 ページ), クイック・セットアップ・マニュアル (2 ページ), オーナーズマニュアル (50 ページ), (ユーザーガイド (32 ページ)

ページを印刷する

English

TAB 2

Setting the TV audio properly

With either an optical or stereo audio connection, the

internal speakers on your TV speaker should be turned off.

This allows you to hear the audio from your TV (and any

sources connected to it) through your CineMate

For a TV with an onscreen audio menu:

Use the TV remote for access to this menu.

• If the menu includes an option for Fixed or Variable audio

output, select Fixed.

• If the menu includes an option for turning the TV

speakers on or off, select Off.

• If there is no menu option for turning off the TV speakers,

turn the TV volume control to its lowest setting.

Using a headphone output from your TV

Use this type of connection only if your TV has neither an

optical output nor stereo audio output.

The headphone output may have the symbol

or be labeled HEADPHONES or PHONES.

This requires a ¼" (3.5 mm)-to-stereo RCA

cable, available at most electronics stores.

1. Insert the ¼" (3.5 mm) plug into headphone

connector on the TV.

TAB 3

TAB 4

system.

TAB 5

TAB 6

2. Insert the red and white RCA plugs into the

ANALOG IN connectors on the interface module.

ANALOG IN

Setting your TV for headphone output

In order to get the best- quality sound from your

CineMate system, you will need to set the TV volume

to the appropriate level.

1. Set the TV volume control to about 80% of the

highest setting, and then leave at that level.

2. Make additional volume adjustments using the

CineMate system.

Note: If the sound is distorted or you are unable to get the

preferred volume levels when using your CineMate system,

you may need to adjust the TV volume settings until you

have the right balance.

TAB 7

TAB 8

YSTEM

ETUP