- ページ 16

スピーカーシステム Bose CineMate GS Series IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose CineMate GS Series II 38 ページ。 Digital home theater speaker system
Bose CineMate GS Series II にも：コード一覧 (28 ページ), クイック・セットアップ・マニュアル (2 ページ), オーナーズマニュアル (50 ページ), (ユーザーガイド (32 ページ)

TAB 8

TAB 7

YSTEM

ETUP

Device settings for digital audio

If you have connected devices to your TV using optical,

coaxial, or HDMI cable, you may need to change the

setting on the device for the correct output.

In the audio menu for each device, make these

adjustments as needed.

1. For the output format, choose Dolby Digital 5.1,

PCM 2.0, or Bitstream.

Dolby Digital offers the highest quality and PCM

provides the next best.

2. Make sure the audio sample rate setting is no

higher than 48kHz.

3. Make sure the correct digital audio output on the

source device is selected.

For details, refer to the owner's manual provided with

your device.

Note: If you cannot hear the audio from a digital source

device, change the connection from the TV to the

interface module by using the stereo audio cable.

Some TVs cannot pass digital audio from an external

sound source through the TV optical output.

TAB 6

TAB 5

TAB 4

TAB 3

Using stereo cable from your TV

If your TV does not have an optical output, or you are

unable to get sound from connected devices, you can

connect the supplied stereo audio cable from your TV

audio out connectors to the interface module.

The stereo audio cable has two RCA plugs at each end,

one red (R) and one white (L).

1. Insert the white plug at each end into the Left (L)

audio connector on the TV and on the interface

module.

2. Insert the red plug at each end into the Right (R)

audio connector on the TV and on the interface

module.

ANALOG IN

TAB 2

English