- ページ 14

スピーカーシステム Bose Videobar VB1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Bose Videobar VB1 47 ページ。 Display mounting kit
Bose Videobar VB1 にも：クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), よくある質問 (8 ページ), 重要安全取扱説明書 (17 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

Wall-mounting the VB1

For best performance, follow these recommendations when setting up the VB1 on a

wall:

When determining where to attach the wall-mount bracket to the wall, make sure

there is enough space around the bracket to fit the VB1:

There must be at least 3.8 cm (1.5 in) above the wall-mount bracket. This will

allow you to "hang" the VB1 on it (Step 7) and to adjust the angle of the VB1. It

will also provide enough space to access the rear-panel connections on the VB1.

There must be at least 11.4 cm (4.5 in) below the wall-mount bracket. This will

allow you to hang the VB1 vertically during installation to insert cables and to

adjust the angle of the VB1.

The space must be at least 73.7 cm (29.0 in) wide—with the wall-mount bracket

in the center of it. This is necessary to accommodate the VB1 plus space to access

the acoustic port and buttons on the sides of the VB1 (there should be 2.5 cm

(1.0 in) on each side).

Only use the included hardware to mount this product.

Note: Some additional tools are required.

Note: Read the included Important Safety Instructions before continuing.

SETU P

1 4

E N