Bose Videobar VB1 Manual - Page 14

Browse online or download pdf Manual for Speaker System Bose Videobar VB1. Bose Videobar VB1 47 pages. Display mounting kit
Also for Bose Videobar VB1: Quick Start Manual (2 pages), Quick Start Manual (2 pages), Faqs (8 pages), Important Safety Instructions Manual (17 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages)

Print Page

Wall-mounting the VB1

For best performance, follow these recommendations when setting up the VB1 on a

wall:

When determining where to attach the wall-mount bracket to the wall, make sure

there is enough space around the bracket to fit the VB1:

There must be at least 3.8 cm (1.5 in) above the wall-mount bracket. This will

allow you to "hang" the VB1 on it (Step 7) and to adjust the angle of the VB1. It

will also provide enough space to access the rear-panel connections on the VB1.

There must be at least 11.4 cm (4.5 in) below the wall-mount bracket. This will

allow you to hang the VB1 vertically during installation to insert cables and to

adjust the angle of the VB1.

The space must be at least 73.7 cm (29.0 in) wide—with the wall-mount bracket

in the center of it. This is necessary to accommodate the VB1 plus space to access

the acoustic port and buttons on the sides of the VB1 (there should be 2.5 cm

(1.0 in) on each side).

Only use the included hardware to mount this product.

Note: Some additional tools are required.

Note: Read the included Important Safety Instructions before continuing.

SETU P

1 4

E N